• |
Component location : Clutch
switch is connected to top of the clutch pedal assembly.
|
• |
Function
|
1. |
Clutch operation is detected through clutch switch signal. This
signal enables ECM to cope with instant change of load condition.
|
2. |
Clutch switch signal is used to detect engaged gear with vehicle
speed and engine speed.
|
Head Lamps Inspection
1.
Check-points upon head lamp failure (HID)
(1)
Check the battery voltage. (Low beam will be on when the
battery voltage above 9V.) ...
Photo Sensor Inspection
1.
Turn the ignition switch ON.
2.
Connect the GDS.
3.
Emit intensive light toward the photo sensor using a lam ...
Parking Assist System Switch Installation
1.
Install the switchs and connect the switch connectors.
2.
Insatll the floor console assembly.
3.
Connect the ...