1. |
Remove the clutch switch.
(Refer to Clutch Switch - "Removal")
|
2. |
Push the clutch switch in the direction of the arrow to make sure
that continuity is cut off.
|
Battery Sensor Installation
1.
Install in the reverse order of removal.
Battery sensor cable installation
bolt: 10.8 ~ 13.7 N.m (1.1 ~ 1.4 kgf.m, 8.0 ~10.1
lb-ft)
...
Installation
1.
Install in the reverse order of removal.
Apply the specified grease to ...
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the crash pad lower panel.
(Refer to Body - "Crash Pad Low Panal")
...