1. |
Turn ignition switch OFF and disconnect the negative (-) battery
cable.
|
2. |
Remove the smart junction box.
(Refer to Body Electrical System - "Relay Box (Passenger Compartment)")
|
3. |
Disconnect the ignition lock switch connector (A).
|
4. |
Remove the ignition lock switch by loosening a nut (A).
|
Fuel Filter Removal
1.
Remove the fuel pump (Refer to “Fuel Pump” in this group).
2.
Disconnect the electric pump wiring connector (A) and the fuel
sender conn ...
Seat Heater Switch Installation
Driver/Passenger Seat
1.
Install the switchs and connect the switch connectors.
2.
Insatll the floor console assembly.
...
Transaxle Control Module (TCM) Installation
1.
Installation is reverse of removal.
•
...