1. |
Remove the battery.
(Refer to Engine Electrical System - "Battery")
|
2. |
Remove the ECM.
(Refer to Engine Control/Fuel System - "Engine Control Module")
|
3. |
Disconnect the clutch regulator (B) and reservoir hose (A) from
the clutch master cylinder.
|
4. |
Remove the clutch pedal.
|
5. |
Remove the master cylinder from the clutch pedal.
|
Cluster Ionizer Description
The cluster ionizer helps clean odor in the vehicle or from the air-conditioner
system.
When the ignition switch is ON, the inoizer runs a "CLEAN" mode and then
a "ION" ...
Rear Hub - Carrier Inspection
1.
Check the hub for cracks and the splines for wear.
2.
Check the brake disc for scoring and damage.
3.
C ...
Power Window Relay Inspection
Diagnosis With GDS
1.
It will be able to diagnose defects of power window with GDS quickly.
GDS can operates actuator forcefully, input/output value monitoring
and ...