Kia Forte: Clutch Master Cylinder

Installation

1. Install in the reverse order of removal. 2. After be equipped, perform bleeding air procedure in clutch release cylinder after pouring t ...

Components

1. Reverse hose 2. Master cylinder 3. Ignition lock switch 4. Clutch switch 5. Clutch arm assembly 6. Pedal pad ...

See also:

Fuel Tank Pressure Sensor (FTPS) Removal
1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Remove the rear seat. (Refer to Body - “Rear Seat ...

Roof antenna Removal
1. Remove the rear roof trim. (Refer to Body - "Roof Trim Assembly") 2. Disconnect roof antenna connectors (A). ...

Oil Pressure Switch Removal and Installation
1. Disconnect the oil pressure switch connector (A) and then remove the oil pressure switch (B). Tightening torque : 9.8 ~ 11.8N.m (1 ...