Kia Forte: Installation
| 1. |
Install in the reverse order of removal.
|
| 2. |
After be equipped, perform bleeding air procedure in clutch release
cylinder after pouring the brake fluid.
(Refer to Clutch System - "Clutch release cylinder")
|
Removal
1.
Separate the push rod (C) after remove the pin (A) and washer
(B).
2.
Remove the battery.
(Refer to Engine Electrical S ...
See also:
Ignition Coil Description
An ignition coil is an induction coil in an engine's ignition system which
transforms the battery's low voltage to the high voltage needed to create an
electric spark in the spark plu ...
Crankshaft Position Sensor (CKPS) Removal
1.
Turn the ignition switch OFF and disconnect the battery negative
(-) cable.
2.
Disconnect the crankshaft position sensor connector (A) ...
IMS module Installation
1.
Install the IMS module after connecting the connector.
2.
Install the front seat.
...
Copyright © www.kifomanual.com 2014-2024