Kia Optima Manuals

Kia Forte: Removal - Clutch Release Cylinder - Clutch System - Kia Forte TD 2014-2018 Service ManualKia Forte: Removal

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Clutch System / Clutch Release Cylinder / Removal

1.
Drain the brake fluid through the bleed plug (A).
  
•
Do not spill brake fluid on the vehicle; it may damage the paint if brake fluid does contact the paint, wash it off immediately with water.

2.
Remove the clutch release cylinder assembly (C) after removing the tube (B) and bolts (A-2ea).
Tightening torque:
14.7 ~ 21.6 N.m (1.5 ~ 2.2 kgf.m,10.8 ~ 15.9 lb-ft)

Inspection
1. Check the clutch release cylinder for fluid leakage. 2. Check the clutch release cylinder boot for damage. ...

Installation
1. Install in the reverse order of removal.    Apply the specified grease to ...

See also:

Rear Door Trim Component Location
(4Door, 5Door) 1. Rear door trim ...

Radiator Inspection
Radiator Cap Testing 1. Remove the radiator cap, wet its seal with engine coolant, and then install it on a pressure tester. 2. ...

Changing Priority
What is Priority? It is possible to pair up to five Bluetooth® Wireless Technology devices with the car audio system. The "Change Priority" feature is used to set the connection priority ...

Categories


Copyright © www.kifomanual.com 2014-2024