1. |
Remove the transaxle assembly.
(Refer to Manual Transaxle System - " Manual Transaxle")
|
2. |
Remove the clutch release bearing (A).
|
3. |
Pull the clip (A).
|
4. |
Remove the clutch release fork (A).
|
5. |
Remove the boot (A).
|
Alternator Installation
1.
Install in the reverse order of removal.
2.
Adjust the alternator belt tension after installation.
(Refer to Engine Mechanical ...
Warning Messages
Shift to "P" position (for smart key system and automatic transaxle)
This warning message illuminates if you try to turn off the engine without
the shift lever in P (Park) position ...
Opening the hood
1. Pull the release lever to unlatch the hood. The hood should pop open slightly.
Open the hood after turning off the engine on a flat surface, shifting the shift
lever to the P(Park) position f ...