1. |
Install the boot (A).
|
2. |
Install the clip to the clutch release fork.
|
3. |
Apply to grease in location A, B and C.
|
4. |
Apply the grease to the hole surface of the clutch release bearing
all around.
|
5. |
Install the clutch release fork (B), clutch release bearing (A).
|
6. |
Install the transaxle assembly.
(Refer to Manual Transaxle System - " Manual Transaxle")
|
DC/DC Converter Circuit Diagram
In the ISG mode, if the power of an audio system turnsOFF by drawdown
while “Auto Starting” or “Idle Starting”functi ...
Engine Cover Removal and Installation
1.
Remove the engine cover (A).
•
...
AGM Battery Cleaning
1.
Make sure the ignition switch and all accessories are in the OFF
position.
2.
Disconnect the battery cables (negative first).
...