Kia Forte: Installation - Manual Transaxle - Manual Transaxle System - Kia Forte TD 2014-2018 Service ManualKia Forte: Installation

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Manual Transaxle System / Manual Transaxle / Installation

  
If the oil seal on the transaxle case side is damaged and fluid is leaking, replace the oil seal with a new unit. When installing the new oil seal, use the specialized tool (oil seal installer, 09453-2F300).

1.
Install in the reverse order of removal.
2.
Adding manual transaxle fluid after Installing the manual transaxle.
(Refer to Manual Transaxle System - "Manual Transaxle Fluid")
Removal
1. Remove the air cleaner assembly. (Refer to Engine Mechanical System - "Air Cleaner") 2. Remove the battery and battery tray ...

Back-up Lamp Switch
...

See also:

Oil Pump Unit (OPU) Circuit diagram
...

Heater Unit Components
1. Heater Case (Left) 2. Heater Case (Right) 3. Console Separator 4. Defog Door 5. Vent Door 6. Floor Door 7. Mix Door (Manual) 8. Mix Door (DATC-Left) 9. Mix Door ( ...

Steering Gear box Replacement
1. Loosen the wheel nuts slightly. Raise the vehicle, and make sure it is securely supported. 2. Remove the front wheel and tire (A ...

Copyright © www.kifomanual.com 2014-2024