1. |
Remove the air cleaner assembly.
(Refer to Engine Mechanical System - "Air Cleaner")
|
2. |
Remove the battery and battery tray.
(Refer to Engine Electrical System - "Battery")
|
3. |
Disconnect the back up lamp switch connector (A).
|
4. |
Remove the back up lamp switch (A).
|
5. |
Replace a new one and install the back up lamp switch.
|
Installation
1.
Install the boot (A).
2.
Install the clip to the clutch release fork.
3.
Apply to grease in location ...
Crash Pad Side Cover Component Location
[LH]
1. Crash pad side cover [LH]
[RH]
1. Crash pad side cover [RH]
...
TJ Joint Installation
1.
Wrap tape around the driveshaft spline (TJ) to prevent damage
to the boot.
2.
Using the alignment marks (D) made during disassembly as a ...