1. |
Check operating of lever of T/M side when operating shift lever
after assembly.
|
2. |
When shift lever to "R" position, check the position of "skirt".
|
3. |
When lever is shifted to each position, if stop occur between
two position, re-adjust select cable.
(Refer to Control cable - "Adjustment")
|
Installation
Be sure to install the harness wires so they will not pinch or
interfere with other parts.
...
Alternator Specification
Item
Specification
Rated voltage
13.5V, 120A
Speed in use
1,000 ~ 18,000 rpm
Voltage regulator
IC Regulator built-in type
...
Crash Pad Side Cover Replacement
•
Put on gloves to protect your hands.
&n ...