1. Radiator 2. Radiator upper mounting bracket 3. Lower mounting insulator 4. Radiator upper hose |
5. Filler neck assembly 6. Radiator lower hose 7. Clamp |
Checking the engine oil level
1. Be sure the vehicle is on level ground.
2. Start the engine and allow it to reach normal operating temperature.
3. Turn the engine off and wait for a few minutes (about 5 minutes) for the oil ...
Drive Belt Installation
1.
Install the drive belt.
(1)
Install the drive belt (C).
(2)
Adjust the tension by t ...
ESC OFF Switch Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the crash pad side switch assembly (A).
3.
D ...