Kia Forte: Oil Cooler Removal and Installation
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Automatic Transaxle System / Hydraulic System / Oil Cooler Removal and Installation
| 1. |
Remove the cooling fan.
(Refer to Cooling System - "Cooling Fan")
|
| 2. |
Remove the radiator upper hose (A).
|
| 3. |
Remove the radiator lower hose (B).
|
| 4. |
Remove the filler neck assembly (A).
|
| 5. |
Disconnect the ATF cooler hoses.
(Refer to Automatic Transaxle System - "Automatic Transaxle")
|
| 6. |
Remove the front bumper cover.
(Refer to Body - "Front Bumper")
|
| 7. |
Remove the head lamps.
(Refer to Body Electrical System - "Head Lamps")
|
| 8. |
Remove the radiator upper bracket (A).
|
| 9. |
Remove the A/C condenser (A) from the radiator assembly and then
lift up the radiator assembly.
|
| 10. |
Installation is reverse order of removal.
|
| 11. |
Fill with engine coolant.
(Refer to Cooling System - "Coolant").
|
| 12. |
Start engine and check for leaks.
|
| 13. |
Recheck engine coolant level.
|
Oil Cooler Components
1. Radiator
2. Radiator upper mounting bracket
3. Lower mounting insulator
4. Radiator upper hose
5. Filler neck assembly
6. Radiator lower hose
7. Clamp
...
Oil Cooler Inspection
Radiator Cap Testing
1.
Remove the radiator cap, wet its seal with engine coolant, and
then install it on a pressure tester.
2.
...
See also:
Removal
1.
Disconnect the battery negative cable and wait for at least thirty
seconds.
before beginning work.
2.
Remove the roof tr ...
Tail Gate Trim Replacement
(5Door)
[Tail gate upper trim]
•
When prying with a flat-tip screwdri ...
Troubleshooting
Symptom
Possible cause
Remedy
Tachometer does not operate
Cluster fuse (10A) blown
Check for short and replace fuse
CAN line faulty
...
Copyright © www.kifomanual.com 2014-2024