Kia Forte: Transaxle Control Module (TCM) Replacement
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / Transaxle Control Module (TCM) Replacement
| 1. |
Turn ignition switch OFF.
|
| 2. |
Disconnect the negative (-) battery cable.
|
| 3. |
Disconnect the TCM connector (A).
|
| 4. |
Remove the TCM (A) after removing the bolt and nut.
|
Transaxle Control Module (TCM) Inspection
Transaxle Control Module(TCM) Problem Inspection Procedure
1.
TEST TCM GROUND CIRCUIT: Measure resistance between TCM and chassis
ground using the backside of TCM harne ...
Transaxle Control Module (TCM) Installation
1.
Installation is reverse of removal.
•
...
See also:
Rolling code programming
To train a garage door opener (or other rolling code equipped devices) with the
rolling code feature, follow these instructions after completing the "Programming"
portion of this text. (A ...
Description
The Evaporative Emission Control System prevents fuel vapor stored in
fuel tank from vaporizing into the atmosphere. When the fuel evaporates in the
fuel tank, the vapor passes through vent h ...
Oil Pump Components
1. Oil pump cover
2. Oil pump housing
3. Driven gear
4. Drive gear
5. Oil seal
6. Bushing-housing
7. Reaction shaft
8. Bushing-reaction shaft
9. Sleeve
10. Bo ...
Copyright © www.kifomanual.com 2014-2024