Kia Forte: Transaxle Oil Temperature Sensor Removal
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / Transaxle Oil Temperature Sensor Removal
| 1. |
Disconnect the negative (-) battery cable.
|
| 2. |
Remove the air cleaner assembly and air duct.
(Refer to Engine Mechanical System - "Air cleaner")
|
| 3. |
Remove the under cover (A).
|
| 4. |
Replace new gasket and the plug after draining the automatic transaxle
fluid by removing the drain plug.
(Refer to Hydraulic System - "Fluid")
|
| 5. |
Remove the air breather hose (A).
|
| 6. |
Remove the valve body cover (B).
|
| 7. |
Disconnect the oil temperature sensor connector (A).
|
| 8. |
Remove the oil temperature sensor (A) after removing a bolt.
|
Transaxle Oil Temperature Sensor Inspection
1.
Turn ignition switch OFF.
2.
Disconnect the Solenoid valve connector.
3.
Measure resistance between sensor ...
Transaxle Oil Temperature Sensor Installation
1.
Install in the reverse order of removal.
After replacement or reinstal ...
See also:
Seat Heater (Non-Air Ventilation) Circuit Diagram
※ The cushion heater and back cushion are connected with wiring. ...
Tire Removal
1.
Remove valve core and deflate the tire.
2.
Remove the side of the tire bead area from the wheel using tire
changing machine .
...
Removal
1.
Turn ignition switch OFF and disconnect the negative (-) battery
cable.
2.
Remove the battery (A) and ECM (B).
...
Copyright © www.kifomanual.com 2014-2024