Kia Optima Manuals

Kia Forte: Transaxle Oil Temperature Sensor Installation - Automatic Transaxle Control System - Automatic Transaxle System - Kia Forte TD 2014-2018 Service ManualKia Forte: Transaxle Oil Temperature Sensor Installation

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / Transaxle Oil Temperature Sensor Installation

1.
Install in the reverse order of removal.
  
After replacement or reinstallation procedure of the valve body assembly, must perform procedures below.
•
Adding Automatic Transaxle Fluid(ATF).
(Refer to Hydraulic System - "Fluid")
•
Replace the gasket (A) before reinstalling the valve body cover.

Transaxle Oil Temperature Sensor Removal
1. Disconnect the negative (-) battery cable. 2. Remove the air cleaner assembly and air duct. (Refer to Engine Mechanical System - &qu ...

Input Speed Sensor Description
Input speed sensor is a vital unit that measures the rate of rotation of the input shaft inside the transaxle and delivers the readings to the Transaxle Control Module(TCM). The sensor provid ...

See also:

Oil Pump Components
1. Inner roter 2. Outer roter 3. Oil pump cover 4. Relief plunger 5. Relief spring 6. Relief plug 7. O-ring (suction side) 8. O-ring (discharge side) ...

Trunk Lid Assembly Replacement
(4Door, 2Door)    • Wear gloves to protect hands from injury. ...

Towing service
...

Categories


Copyright © www.kifomanual.com 2014-2024