1. |
Disconnect the negative (-) battery cable.
|
2. |
Remove the air cleaner assembly and air duct.
(Refer to Engine Mechanical System - "Air cleaner")
|
3. |
Remove the under cover (A).
|
4. |
Replace new gasket and the plug after draining the automatic transaxle
fluid by removing the drain plug.
(Refer to Hydraulic System - "Fluid")
|
5. |
Remove the air breather hose (A).
|
6. |
Remove the valve body cover (B).
|
7. |
Remove the plate and the detent spring (A) after removing the
bolt.
|
8. |
Remove the bolt (3ea) after disconnecting the solenoid valve connector
(B) and the oil temperature sensor connector (A).
|
9. |
Remove the valve body assembly (A).
|
10. |
Disconnect the input & output speed sensor connector(A).
|
11. |
Remove the input & output speed sensor (B) after removing the
bolts(2ea).
|
Component Location
1. Windshield wiper arm & blade
2. Wiper & washer switch
3. Windshield washer hose
4. Windshield wiper motor & linkage
5. Washer motor
6. Washer reservoir
...
Rear Door Belt Inside Weatherstrip Replacement
(4Door, 5Door)
1.
Remove the rear door trim.
(Refer to Rear Door - "Rear Door Trim")
2.
Remove the rear door bel ...
Front Door Side Weatherstrip Replacement
(4Door, 5Door)
1.
Loosen the front door checker (B) mounting bolt.
Tightening torque:
16.7 ~ 25.5 N.m (1.7 ~ 2.6 kgf.m, 12.3 ...