1. |
Installation is the reverse of removal.
|
After replacement or reinstallation procedure of the valve body
assembly, must perform procedures below.
|
Battery Components
1. Battery insulation pad
2. Battery (Non-ISG Type)
3. Battery (ISG Type)
4. Battery tray
5. Battery mounting bracket
...
Fuel Pump Removal
[LEV2]
1.
Release the residual pressure in fuel line (Refer to the Fuel
Delivery System - Repair Procedures - "Release Residual Pressure in
Fuel Line ...
Fluid Components Location
1. Injection hole(eyebolt)
2. Oil level plug
3. Oil drain plug
...