Kia Forte: Output Speed Sensor Description

The output speed sensor is a vital unit that measures the rate of rotation of the transaxle's turbine shaft and output shaft, and delivers the readings to the Transaxle Control Module(TCM). The sensor provides critical input data that's used in feedback control, damper clutch control, gear setting control, line pressure control, clutch activation pressure control, and sensor fault analysis.

Input Speed Sensor Installation

1. Installation is the reverse of removal.    After replacement or reinstallation procedure of ...

Output Speed Sensor Specifications

▷ Type: Hall effect sensor Operation condition [°C(°F)] ((-)40 ~ 150)) -40 ~ 302 Air gap(mm)in. (1.1 ~ 1.55) 0.043 ~ 0.061 Output voltage ...

See also:

Troubleshooting
Ignition System Symptom Suspect Area Remedy Engine will not start or is hard to start (Cranks OK) Ignition lock switch Inspect ignitio ...

Replacement
Rear Brake Pads 1. Remove the rear wheel & tire. Tightening torque: 88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft ...

Fuel Economy
Range The range is the estimated distance the vehicle can be driven with the remaining fuel. Distance range : 30 ~ 9999 mi or 50 ~ 9999 km. If the estimated distance is below 30 mi. (50 km), t ...