Kia Optima Manuals

Kia Forte: Torque Converter Control Solenoid Valve (T/CON_VFS) Installation - Automatic Transaxle Control System - Automatic Transaxle System - Kia Forte TD 2014-2018 Service ManualKia Forte: Torque Converter Control Solenoid Valve (T/CON_VFS) Installation

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / Torque Converter Control Solenoid Valve (T/CON_VFS) Installation

1.
Install in the reverse order of removal.
  
•
Adding Automatic Transaxle Fluid(ATF).
(Refer to Hydraulic System - "Fluid")
•
Perform Transaxle Control Module(TCM) learning after replacing the valve body to prevent slow transaxle response, jerky acceleration and jerky startup.
(Refer to Automatic Transaxle Control System - "Repair procedures")
•
Replace the gasket (A) before reinstalling the valve body cover.
Torque Converter Control Solenoid Valve (T/CON_VFS) Removal
1. Disconnect the negative (-) battery cable. 2. Remove the air cleaner assembly and air duct. (Refer to Engine Mechanical System - &qu ...

26 Brake Control Solenoid Valve(26/B_VFS) Description
26 Brake(26/B) Control Solenoid Valve is attached to the valve body. This variable force solenoid valve directly controls the hydraulic pressure inside the 26 Brake. ...

See also:

Crankshaft Position Sensor (CKPS) Removal
1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Disconnect the crankshaft position sensor connector (A) ...

Components
Components (1) (4Door) 1. Front bumper cover 2. Front bumper upper weatherstrip 3. Front bumper side bracket [LH] 4. Front bumper side bracket [RH] Co ...

Head Lamps Description and Operation
HID Head Lamp 1. Bulb (1) Elements Xenon gas: Xenon gas activates the initial reaction for rapid illuminati ...

Categories


Copyright © www.kifomanual.com 2014-2024