1. |
Disconnect the negative (-) battery cable.
|
2. |
Remove the air cleaner assembly and air duct.
(Refer to Engine Mechanical System - "Air cleaner")
|
3. |
Remove the under cover (A).
|
4. |
Replace new gasket and the plug after draining the automatic transaxle
fluid by removing the drain plug.
(Refer to Hydraulic System - "Fluid")
|
5. |
Remove the valve body cover (A) and eyebolt (B).
|
6. |
Remove the bolt (3ea) after disconnecting the solenoid valve connector
(B) and the oil temperature sensor connector (A).
|
7. |
Remove the solenoid valve (B) after removing the solenoid support
(A).
|
Special Service Tools
Tool Name / Number
Illustration
Description
09411-1P000
Clutch disc guide
Used for holding clutch disc when installing
...
Rear Glass Defogger Switch Inspection
1.
The rear glass defogger switch inputs can be checked using the
GDS.
2.
To check the input value of rear glass defogger switch, select
...
Sunroof Guide Replacement
1.
Remove the sunroof assembly.
(Refer to Sunroof - "Sunroof Assembly")
2.
Remove a drip link assembly (A) after lowering a gu ...