|
1. |
Disconnect the Inhibitor swtich connector.
|
2. |
Ignition KEY "ON"" & Engine "OFF".
|
3. |
Measure voltge between supplied power and ground at inhibitor
circuit.
|
1. |
Connect the Inhibitor switch connector.
|
2. |
Ignition KEY "ON" & Engine "OFF".
|
3. |
Measure voltages between each terminal and chassis ground during
shift lever changed "P, R, N, D".
Signal Code Table
|
Front Seat Cushion Track Component Location
1. Front seat cushion track
...
26 Brake Control Solenoid Valve(26/B_VFS) Circuit Diagram
...
DC/DC Converter Operation Principle
•
In the ISG mode, if the power of an audio system turns
OFF by drawdown while “Auto ...