1. |
Place the shift lever into the "N" position.
|
2. |
Remove the air cleaner.
(Refer to Engine Mechanical System - "Air cleaner")
|
3. |
Remove the battery and the battery tray.
(Refer to Engine Electrical System - "Battery")
|
4. |
Disconnect the inhibitor switch connector (A).
|
5. |
Remove the shift cable mounting nut (B).
|
6. |
Remove the manual control lever (B) and the washer after removing
a nut (A).
|
7. |
Remove the inhibitor switch (A) after removing the bolts (2ea).
|
Components
Components (1)
(Rear Seat 5:5 Type)
[Rear Seat Back]
1. Rear seat headrest
2. Rear seat back webbing guide
3. Rear seat headrest guide
4. Rear seat back ...
Canister Close Valve (CCV) Installation
•
Install the component with the specified torques.
•
...
For best battery service
Keep the battery securely mounted.
Keep the battery top clean and dry.
Keep the terminals and connections clean, tight, and coated with petroleum
jelly or terminal grease.
Rinse any spi ...