1. |
Remove the floor console assembly.
(Refer to Body - "Floor Console")
|
2. |
Remove the air duct.
|
3. |
Disconnect the control cable (A).
|
4. |
Disconnect the connector (A).
|
5. |
Disconnect the wire mounting clips (B).
|
6. |
Remove the bolts and then shift lever assembly (A).
|
Installation
1.
Install in the reverse order of removal.
2.
After installation, bleed the brake system.
(Refer to Brake system bleeding)
...
Variable Charge Motion Actuator (VCMA) Description
The Variable Charge Motion Actuator (VCMA) is installed on the inlet of
the intake manifold.
It consists of a DC motor which actuates the VCM valve and a position
sensor which detects th ...
Power Outside Mirror Switch Removal
1.
Disconnect the negative(-) battery terminal.
2.
Remove the front door trim.
(Refer to Body - "Front Door Trim")
...