1. |
Remove the floor console assembly.
(Refer to Body - "Floor Consol")
|
2. |
Remove the air duct.
|
3. |
Remove the shift cable (A).
|
4. |
Remove the retainer (A) and nut (B).
|
5. |
Remove the nut (C) from the manual control lever.
|
6. |
Remove the cable (B) from the bracket (A) at transaxle assembly
side.
|
7. |
Remove the shift cable by pulling it toward the interior.
|
Scheduled maintenance service
Follow the Normal Maintenance Schedule if the vehicle is usually operated where
none of the following conditions apply. If any of the following conditions apply,
follow the Maintenance Under Severe ...
Rear Bumper Beam Assembly Component Location
(4Door, 2Door)
1. Rear bumper beam assembly
(5Door)
1. Rear bumper beam assembly
...
Instrument cluster
1. Tachometer
2. Speedometer
3. Engine coolant temperature gauge
4. Fuel gauge
5. Turn signal indicators
6.Warning and indicator lights
7. LCD display ...