Kia Forte: Front Hub / Knuckle Reassembly
1. |
Install the hub bearing to the knuckle assembly.
(1) |
Lay the knuckle assembly (A) on press.
|
(2) |
Lay a new hub bearing upon the knuckle assembly (A).
|
(3) |
Lay a suitable adapter (B) upon the hub bearing.
|
(4) |
Install the hub bearing to the knuckle assembly by using
press.
|
- |
Do not press against the inner race of the hub
bearing because that can cause damage to the bearing
assembly.
|
- |
Always use a new wheel bearing assembly.
|
|
|
2. |
Install the hub assembly to the knuckle assembly.
(1) |
Lay the hub assembly (A) upon a suitable adapter .
|
(2) |
Lay the knuckle assembly (B) upon the hub assembly (A).
|
(3) |
Lay a suitable adapter (C) upon the hub bearing.
|
(4) |
Install the hub assembly (A) to the knuckle assembly (B)
by using press.
|
Do not press against the inner race of the hub bearing
because that can cause damage to the bearing assembly.
|
|
3. |
Install the snap ring (A).
|
1.
Remove the snap ring (A).
2.
Remove the hub assembly from the knuckle assembly.
(1)
Install the ...
1.
Check the hub for cracks and the splines for wear.
2.
Check the brake disc for scoring and damage.
3.
C ...
See also:
Canister Removal
[LEV2 Type]
1.
Lift the vehicle.
2.
Disconnect the vapor hose quick-connector (A) and ventilation
hose (B).
...
Injector Description
Based on information from various sensors, the ECM can calculate the fuel
amount to be injected. The fuel injector is a solenoid-operated valve and the
fuel injection amount is controlled by ...
Water pump Troubleshooting
Symptoms
Possible Causes
Remedy
Coolant leakage
•
From the bleed hole of the water pump
Visually c ...