Kia Forte: TJ Joint Inspection
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Driveshaft and axle / Driveshaft Assembly / TJ Joint Inspection
| 1. |
Check the spider assembly for roller rotation, wear or corrosion.
|
| 2. |
Check the groove inside the joint case for wear or corrosion
|
| 3. |
Check the TJ boots for damage and deterioration.
|
TJ Joint Replacement
•
Special grease must be applied to the driveshaft joint.
Do not substitute with another ...
TJ Joint Installation
1.
Wrap tape around the driveshaft spline (TJ) to prevent damage
to the boot.
2.
Using the alignment marks (D) made during disassembly as a ...
See also:
Fluid Service Adjustment Procedure
Oil level Check
A check of Automatic Transaxle Fluid (ATF) level is not normally
required during scheduled ...
Component Location
1. Seat Memory Unit (IMS)
2. IMS control switch
3. IMS driver power seat control
...
Components
(1)
[General Type]
(4Door, 2Door)
1. Roof trim assembly
2. Sunvisor [LH]
3. Sunvisor [RH]
4. Retainer
5. Assist handle
6. Assist handle bracket ...
Copyright © www.kifomanual.com 2014-2024