1. |
Remove the front driveshaft.
(Refer to Driveshaft Assembly - “Front Driveshaft”)
|
2. |
Remove the TJ joint assembly.
(Refer to Driveshaft Assembly - “TJ joint”)
|
3. |
Remove the remove the both side of band (B) of the dynamic damper
(A).
|
4. |
Fix the driveshaft (A) with a vice (B) as illustrated.
|
5. |
Apply soap powder on the shaft to prevent being damaged between
the shaft spline and the dynamic damper when the dynamic damper is removed.
|
6. |
Seperate the dynamic damper (A) from the shaft (B) carefully.
|
Fuel Pump Removal
[LEV2]
1.
Release the residual pressure in fuel line (Refer to the Fuel
Delivery System - Repair Procedures - "Release Residual Pressure in
Fuel Line ...
Installation
1.
Install the horn and connect the horn connector.
2.
Reassemble the front bumper cover.
...
Rear Seat Back Cover Replacement
(4Door, 2Door)
[LH]
•
Put on gloves to protect your hands.
...