1. |
Loosen the wheel nuts slightly.
Raise the vehicle, and make sure it is securely supported.
|
2. |
Remove the rear wheel and tire (A) from rear hub .
|
3. |
Remove the brake caliper mounting bolts, and then place the brake
caliper assembly (A) with wire.
|
4. |
Loosen the mounting screws and then brake disc (A).
|
5. |
Loosen the bolts and then remove the hub bearing (A).
|
6. |
Install in the reverse order of removal.
|
7. |
Check the rear alignment.
(Refer to Suspension System - "Rear Alignment")
|
Troubleshooting Guide
Before Thinking The Product Has Malfunctioned
1.
Errors which occur during the operation or installation of the
device may be mistaken as a malfunction of the actual de ...
CVVT & Camshaft Inspection
Camshaft
1.
Inspect the cam lobes.
Using a micrometer, measure the cam lobe height.
If the cam lobe height is less than specification, replace the
camsh ...
Purge Control Solenoid Valve (PCSV) Circuit Diagram
(M/T)
(A/T)
...