1. |
Using the special tool (09546-26000), compress the coil spring
(A).
|
2. |
Remove the self-locking nut (C) from the strut assembly (B).
|
3. |
Remove the insulator, spring seat, coil spring and dust cover
from the strut assembly.
|
4. |
Reassembly is the reverse of the disassembly.
|
Components Location
1. Battery sensor
2. Brake Booster Vacuum Pressure Sensor (BBVPS)
3. AGM battery
4. DC/ DC Converter
5. ISG OFF Switch
6. Alternator
7. Starter
8. Brake switch
...
Front Door Inside Handle Replacement
(4Door, 5Door, 2Door)
1.
Remove the front door trim.
(Refer to Front Door - "Front Door Trim")
2.
After loosenin ...
Certification label
The certification label is located on the driver's door sill at the center pillar.
This label shows the maximum allowable weight of the fully loaded vehicle. This
is called the GVWR (Gross V ...