1. |
Loosen the wheel nuts slightly.
Raise the vehicle, and make sure it is securely supported.
|
2. |
Remove the front wheel and tire (A) from front hub.
|
3. |
Loosen the bolt & nut and then remove the lower arm (A).
|
4. |
Loosen the bolts and nuts and then remove the front lower arm
(A).
|
5. |
Installation is the reverse of removal.
|
6. |
Check the front alignment.
(Refer to Front Suspension System - "Front Alignment")
|
Operating door locks from outside the vehicle
Turn the key toward the rear of the vehicle to unlock and toward the front
of the vehicle to lock.
If you lock/unlock the door with a key, all vehicle doors will lock/unlock
automatically ...
Overhead Console Lamp Inspection
1.
Remove the overhead console lamp assembly then check for continuity
between terminals. If the continuity is not as specified, replace the
map lamp switch.
...
Front Seat Shield Inner Cover Component Location
1. Front seat shield inner cover
...