1. |
Loosen the wheel nuts slightly.
Raise the vehicle, and make sure it is securely supported.
|
2. |
Remove the front wheel and tire (A) from front hub.
|
3. |
Remove the stabilizer link (A) loosening the nut (B) and (C).
|
4. |
Installation is the reverse of removal.
|
5. |
Check the front alignment.
(Refer to Front Suspension System - "Front Alignment")
|
Customer Complaint Analysis Check Sheet
There are six areas where a problem can occur: wiring harness, the radio,
the CD player, and speaker. Troubleshooting enables you to confine the problem
to a particular area.
Chart 1 ...
Climate Control Air Filter Replacement
1.
Disconnect the stopper (B) from the glove box (A).
2.
Disconnect the air damper (A) from the glove box (B).
...
Audio Unit Removal
•
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply prote ...