1. |
Loosen the wheel nuts slightly. Raise the vehicle, and make sure
it is securely supported.
|
2. |
Remove the front wheel and tire (A) from front hub.
|
3. |
Remove the rear shock absorber (A) from the frame by loosening
the bolt.
|
4. |
Loosen the bolt & nut and then remove the rear shock absorber
(A) from the torsion beam axle.
|
5. |
Installation is the reverse of removal.
|
6. |
Check the rear alignment.
(Refer to Rear Suspension System - "Rear Alignment")
|
Engine Coolant Temperature Sensor (ECTS) Circuit Diagram
(M/T)
(A/T)
...
Antenna Coil Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the crash pad lower panel.
(Refer to Body - "Crash Pad Lower Panel" ...
Front Wheel Guard Replacement
•
Put on gloves to protect your hands.
&n ...