Kia Forte: Rear Shock Absorber Inspection
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Suspension System / Rear Suspension System / Rear Shock Absorber Inspection
| 1. |
Check the rubber parts for wear and deterioration.
|
| 2. |
Compress and extend the piston rod (A) and check that there is
no abnormal resistance or unusual sound during operation.
|
Disposal
| 1. |
Fully extend the piston rod.
|
| 2. |
Drill a hole on the (A) section to remove gas from the cylinder.
|
Rear Shock Absorber Replacement
1.
Loosen the wheel nuts slightly. Raise the vehicle, and make sure
it is securely supported.
2.
Remove the front wheel and tire (A) from f ...
Rear Coil Spring Components
1. Spring upper pad
2. Spring
3. Spring lower pad
...
See also:
Output Speed Sensor Removal
1.
Disconnect the negative (-) battery cable.
2.
Remove the air cleaner assembly and air duct.
(Refer to Engine Mechanical System - &qu ...
Cigarette lighter (if equipped)
For the cigarette lighter to work, the ignition switch must be in the ACC or
ON position.
To use the cigarette lighter, push it all the way into its socket. When the element
is heated, the ligh ...
Fuses
A vehicle's electrical system is protected from electrical overload damage by
fuses.
This vehicle has 2 fuse panels, one located in the driver's side panel bolster,
others in the engine ...
Copyright © www.kifomanual.com 2014-2024