1. |
Loosen the wheel nuts slightly. Raise the vehicle, and make sure
it is securely supported.
|
2. |
Remove the front wheel and tire (A) from front hub.
|
3. |
Remove the rear brake caliper.
(Refer to Brake System - "Rear Disc Brake")
|
4. |
Loosen the bolt and then remove the wheel speed sensor cable (A).
|
5. |
Loosen the bolt and then remove the rear shock absorber (A) from
the frame.
|
6. |
Loosen the bolt & nut and then remove the rear shock absorber
(A) from the torsion beam axle.
|
7. |
Remove the rear wheel housing (A).
|
8. |
Loosen the mounting bolts and then remove the torsion beam axle
(A) from the frame.
|
9. |
Remove the rear hub assembly.
(Refer to Driveshaft and axle - "Rear Hub - Carrier")
|
10. |
Installation is the reverse of removal.
|
11. |
Check the rear alignment.
(Refer to Rear Suspension System - "Rear Alignment")
|
2. TCM Terminal Function
Connector [A]
Pin
Description
Pin
Description
1
-
54
-
2
Line pressure control solenoid valve (LINE_VFS)
55 ...
Steering Column Shroud Panel Component Location
1. Steering column shroud lower panel
2. Steering column shroud upper panel
...
Components
Components (1)
(4Door, 2Door)
1. Rear bumper cover
2. Rear bumper beam assembly
3. Rear bumper lower side bracket
4. Rear bumper side bracket [RH]
5. Rear bump ...