Kia Forte: Hub nut tightening sequence

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Suspension System / maincat / Hub nut tightening sequence

Tighten the hub nuts as follows.

Tightening torque:

88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)

When using an impact gun, final tightening torque should be checked using a torque wrench.

Run out inspection

1.	Jack up the vehicle.

2.

Measure the wheel Run-out by using a dial indicator as illustration below.

Run-out	Aluminum	Steel
Radial mm(in.)	Below 0.3(0.0118)	Below 1.4(0.0551)
Lateral mm(in.)	Below 0.3(0.0118)	Below 0.9(0.0354)

3.	If measured value exceeds the standard value, replace the wheel.

maincat

...

Tire Pressure Monitoring System

...

See also:

IMS Power Seat Control Installation
- Make sure that the IMS control switch connectors and related connectors are plugged in ...

Emergency Fastening Device (EFD)
Front emergency fastening device operates as well as belt pretensioner at the same time If it gets into its deploy condition after a collision. It is located at near anchor on front seat and ...

Removal
Handle the sensor with care. 1. Remove the tire. (Refer to Tire/Wheels - "Tire& ...

Categories

Copyright © www.kifomanual.com 2014-2024