Kia Forte: Removal - TPMS Sensor - Tire Pressure Monitoring System - Suspension System - Kia Forte TD 2014-2018 Service ManualKia Forte: Removal

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Suspension System / Tire Pressure Monitoring System / TPMS Sensor / Removal

  
Handle the sensor with care.
1.
Remove the tire.
(Refer to Tire/Wheels - "Tire")
2.
Remove the valve nut.

  
The valve nut should not be re-used.
3.
Discard the valve assembly.
TPMS Sensor
1. Storage State Sensors are in this state when they first arrive at dealership. This state is entered by LF request/command only. Either LF request ...

Installation
Sensor Fit    • Handle the sensor with care. • ...

See also:

Operation
1. Vehicle moving. 2. The transmission lever position is D-range. The brake pedal is released. 3. The ...

Underdrive Brake Control Solenoid Valve(UD/B_VFS) Removal
   Replacing an on/off solenoid valve (SS-A, SS-B) does not require additional hydraulic pressure adjustment; however, the ...

CVVT Oil Control Valve (OCV) Installation
   • Install the component with the specified torques. • ...

Copyright © www.kifomanual.com 2014-2024