Kia Forte: Replacement
| 1. |
Disconnect the battery negative cable from the battery and then
wait for at least 30 seconds.
|
| 2. |
Turn the steering wheel so that the front wheels can face straight
ahead.
|
| 3. |
Remove the airbag module.
(Refer to Restraint - "Driver Airbag (DAB) Module and Clock Spring")
|
| 4. |
Disconnect the connector & lock nut (A) and then remove the steering
wheel (B) by using special service tools (09561-11001).
|
| 5. |
Installation is the reverse of the removal.
|
Component
1. Airbag module
2. Remote control assembly
3. Garnish
4. Steering wheel
5. Wiring
6. Lower cover
...
Disaseembly
1.
Loosen the screw (A-3ea) and then remove the lower cover (B) from
the steering wheel body.
Tightening torque :
7.8 ~ 11.8 N.m(0.8 ...
See also:
Door Scuff Trim Replacement
(4Door, 5Door)
•
Put on gloves to protect your hands.
...
Hood switch Inspection
1.
Disconnect the hood switch connector (A).
2.
Check for continuity between terminals
...
Torque Converter Control Solenoid Valve (T/CON_VFS) Specifications
Direct control VFS[T/CON]
▷ Control type : Normal low type
Control Pressure kpa (kgf/cm², psi)
9.81 ~ 500.14 (0.1 ~ 5.1,1.42 ~ 72.54)
Current value(mA)
...
Copyright © www.kifomanual.com 2014-2024