1. |
Loosen the bolt (A) and then disconnect the universal joint assembly
from the steering column assembly.
|
2. |
Reassembly is the reverse of the disassembly.
|
1. |
Make a groove on the head of special bolts (A) by a punch.
|
2. |
Loosen the special bolt using a screw driver and then remove the
key lock assembly from the steering column assembly.
|
3. |
Reassembly is the reverse of the disassembly.
|
Inspection
1.
Check the brake warning lamp in the IGN ON position.
Brake warnin ...
Head Lamp Leveling Actuator Inspection with GDS
Initialization and diagnosis sequence by using GDS equipment.
Below content summarize the procedure for A/S using GDS.
No.
Procedure
1
Locate vehicle to flat ...
On-board Refueling Vapor Recovery (ORVR) valve Installation
1.
Installation is the reverse of removal.
...