Before doing any SRS repairs, use the GDS Pro to check for DTCs.
Refer to the Diagnostic Trouble Code list for repairing of the related
DTCs.
|
- |
SRSCM
|
- |
Deployed airbag(s)
|
- |
Seat belt pretensioner(s)
|
- |
Anchor pretensioner(s)
|
- |
Front impact sensors
|
- |
SRS wiring harnesses
|
- |
Inspect the clock spring for heat damage.
If any damage found, replace the clock spring.
|
- |
SRSCM
|
- |
Deployed airbag(s)
|
- |
Side impact sensor(s) for the deployed side(s)
|
- |
SRS wiring harnesses
|
- |
Turn the ignition switch ON; the SRS indicator should come on
for about six seconds and then go off.
|
Component Location
Component Location (1)
1. Smart key unit
2. External buzzer
3. Door outside handle
4. Interior antenna
5. RF receiver
Component Location (2)
1. Bump ...
Towing service
...
Crankshaft Position Sensor (CKPS) Installation
•
Install the component with the specified torques.
•
...