1. |
Remove the ignition key from the vehicle.
|
2. |
Disconnect the battery negative cable and wait for at least three
minutes before beginning work.
|
3. |
Remove the floor console.
(Refer to Body - "Floor console")
|
4. |
Remove the rear air vent duct (A).
|
5. |
Pull up the lock, of the SRSCM connector, the disconnect the connector
(A).
|
6. |
Remove the SRSCM mounting bolt and nuts from the SRSCM, then remove
the SRSCM.
|
EBD(Electronic Brake-force Distribution)
The EBD system (Electronic Brake force Distribution) as a sub-system of
the ABS system is to control the effective adhesion utilization by the rear
wheels.
It further utilizes the efficie ...
Front Seat Belt Buckle Component Location
1. Front seat belt buckle
...
Turn Signal Lamp
Removal
1.
Remove the outside rear view mirror.
(Refer to Body - "Outside Rear View Mirror")
Installation
1.
Install the out ...