1. |
Remove the ignition key from the vehicle.
|
2. |
Disconnect the battery negative cable and wait for at least three
minutes before beginning work.
|
3. |
Install the SRSCM with the SRSCM mounting bolt and nuts.
|
4. |
Connect the SRSCM harness connector.
|
5. |
Install the rear air vent duct and floor console.
(Refer to Body - "Floor console")
|
6. |
Reconnect the battery negative cable.
|
7. |
After installing the SRSCM, confirm proper system operation:
|
Auto Head Lamp Leveling Unit Inspection
1.
Ignition "ON".
2.
Turn on the head lamp switch.
3.
Check for operation. If the aim of the head lam ...
Description
•
Component location : Clutch
switch is connected to top of the clutch pedal assembly.
•
Function
1.
Clutch ...
Intake Air Temperature Sensor (IATS) Specification
Temperature [°C(°F)]
Resistance (kΩ)
-40(-40)
40.93 ~ 48.35
-20(-4)
13.89 ~ 16.03
0(32)
5.38 ~ 6.09
10(50)
...