|
1. |
Install the new front impact sensor.
|
2. |
Tighten the front impact sensor mounting nut.
|
3. |
Connect the front impact sensor connector.
|
4. |
Left side - Install the head lamp assembly.
(Refer to Body electrical - "Head Lamps")
Right side - Install the washer reservoir.
(Refer to Body electrical - "Front washer motor")
|
5. |
Reconnect the battery negative cable.
|
6. |
After installing the Front Impact Sensor, confirm proper system
operation:
|
Components Location
1. Purge Control Solenoid Valve (PCSV)
2. Vapor line
3. ORVR valve
4. Fuel tank air filter
5. Canister Close Valve (CCV)
6. Canister
7. Fuel Tank Pressure Sensor ( ...
Injector Installation
•
Install the component with the specified torques.
•
...
Input Speed Sensor Installation
1.
Installation is the reverse of removal.
After replacement or reinstallation procedure of ...