Kia Forte: Side Impact Sensor (SIS)

Side Impact Sensor (SIS) system consists of two P-SIS which are installed at each center of the front door module (LH and RH) and two SIS which are installed at each center pillar nearby (LH and RH).

Side Pressure Sensor is also called P-SIS because it detects pressure due to collision at its mounting location.

Side Impact Sensor is also called A-SIS because it detects acceleration.

SRSCM decides deployment of the airbag and the time of deployment through the collision signal of the SIS when the collision occurred.

Installation

   • Do not turn the ignition switch ON and do not contact the battery cable while replacin ...

Components

...

See also:

Air Ventilation Seat Unit Circuit Diagram
...

In-car Sensor (DATC only) Description
An in-car air temperature sensor is located in the crash pad lower panel. The sensor contains a thermistor which measures the temperature of the inside. The signal decided by the resistance ...

Components
[M/T] 1. Floor console assembly 2. Console upper cover 3. Console tray 4. Console armrest met 5. Rear console cover 6. Rear console airvent 7. Console du ...