Pressure Side Impact Sensor |
|
1. |
Disconnect the battery negative cable, and wait for at least three
minutes before beginning work.
|
2. |
Remove the front door trim.
(Refer to Body - "Front door trim")
|
3. |
Disconnect the pressure side impact sensor connector (A).
|
4. |
Loosen the pressure side impact sensor mounting screws (B) and
then remove the pressure side impact sensor.
|
1. |
Disconnect the battery negative cable and wait for at least three
minutes before beginning work.
|
2. |
Remove the door scuff trim.
(Refer to Body - "Door scuff trim")
|
3. |
Remove the center pillar lower trim.
(Refer to Body - "Center pillar trim")
|
4. |
Disconnect the side impact sensor connector (A).
|
5. |
Loosen the side impact sensor mounting bolt and then remove the
side impact sensor (B).
|
Line Pressure Control Solenoid Valve Circuit Diagram
...
Steering Gear box Replacement
1.
Loosen the wheel nuts slightly.
Raise the vehicle, and make sure it is securely supported.
2.
Remove the front wheel and tire (A ...
Components Location
[SULEV Type]
[LEV2 Type]
1. Fuel tank
2. Fuel pump
3. Fuel filter
4. Fuel pressure regulator
5. Canister
6. Fuel tank air filter
7. Fuel tank ...