Kia Forte: Seat Belt Buckle Sensor (BS)

The SRSCM shall monitor the status of the driver and passenger seat belt buckle. The SRSCM provides one pin each for the driver and passenger seat belt buckle status input. The seat belt buckle circuit operates from internal boost voltage supplied by the SRSCM, and uses chassis ground for the signal return. The buckle status shall modify the SRSCM deployment. If the buckle status is unbuckled, the corresponding pretensioner will not be deactivated.

Installation

Pressure Side Impact Sensor 1. Install the new pressure side impact sensor with the screws (B) then connect the pressure side impact sensor connector (A). ...

Components

...

See also:

Rear Combination Lamp Removal
Rear Combination Lamp (Outside) 1. Disconnect the negative (-) battery terminal. 2. Remove the rear combination lamp cover (A). ...

Operating door locks from outside the vehicle
Turn the key toward the rear of the vehicle to unlock and toward the front of the vehicle to lock. If you lock/unlock the door with a key, all vehicle doors will lock/unlock automatically ...

Sunroof Assembly Replacement
   • Put on glove to protect your hands. &nb ...