Kia Forte: Installation
Be sure to install the harness wires so they will not pinch or
interfere with other parts.
|
| 1. |
Remove the ignition key from the vehicle.
|
| 2. |
Disconnect the battery negative cable, and wait for at least three
minutes before beginning work.
|
| 3. |
Install the seat belt buckle sensor.
|
| 4. |
Install the front seat assembly.
(Refer to Body - "Front seat")
|
| 5. |
Reconnect the battery negative cable.
|
| 6. |
After installing the seat belt buckle sensor, confirm proper system
operation:
|
Removal
1.
Disconnect the battery negative cable, and wait for at least three
minutes before beginning work.
2.
Remove the front seat assembly.
...
Weight Classification System (WCS)
WCS is intended to detect the occupant’s physique in order to determine
whether the passenger airbag should be suppressed or deployed. WCS classifies
the front passenger side seat by measurin ...
See also:
Hands Free Switch Installation
1.
Reassemble the steering wheel remote control switch after connecting
the connector.
2.
Reassemble the driver airbag module.
...
Rear Door Inside Handle Replacement
(4Door, 5Door)
1.
Remove the rear door trim.
(Refer to Rear Door - "Rear Door Trim")
2.
After loosening the moun ...
Power Door Lock Relay Inspection
Diagnosis With GDS
1.
It will be able to diagnose defects of power door lock with GDS
quickly. GDS can operates actuator forcefully, input/output value monitoring
...
Copyright © www.kifomanual.com 2014-2024