1. |
Set the front tires straight-ahead before removing the steering
wheel.
|
2. |
Disconnect the battery negative cable.
|
3. |
Remove the wiring fixing clip (C) and disconnect the horn connector
(A).
|
4. |
Release the connector locking pin, then disconnect the driver
airbag module connector (B).
|
5. |
Remove the steering wheel
(Refer to Steering System - "Steering wheel")
|
6. |
Remove the steering column shroud.
|
7. |
Disconnect the clock spring and horn connector, then remove the
clock spring.
|
Fuel Tank Installation
1.
Install in the reverse order of removal.
Fuel tank band installation
nut:
39.2 ~ 54.0 N.m (4.0 ~ 5.5 kgf.m, 28.9 ~ 39.8 lb-ft)
...
Room lamp
To turn the room lamp ON or OFF, push the switch.
If your vehicle is not equipped with a map lamp, the room lamp will also turn
on or off as follows.
The room lamp comes on when a door is opene ...
Front Oil Seal Components
1. Front oil seal
...