1. |
Disconnect the battery negative cable and wait for at least thirty
seconds before beginning work.
|
2. |
Remove the glove box housing.
(Refer to Body - "Glove box housing")
|
3. |
Disconnect the passenger airbag connector (A) and remove the PAB
mounting bolts (B).
|
4. |
Remove the crash pad.
(Refer to Body - "Main crash pad assembly")
|
5. |
Remove the mounting bolts from the crash pad. Then remove the
passenger airbag.
|
Smart key precautions
If you lose your smart key, you will not be able to start the engine.
Tow the vehicle, if necessary, and contact an authorized Kia dealer.
A maximum of 2 smart keys can be registered to a singl ...
Inspection
Check it by the procedure below to see if the function of the ECM is normal.
1.
Turn the ignition key to the "ON" position.
2.
Cov ...
Description
Limitations Of The Navigation system
GPS Signal Reception State
As the GPS satellite frequency is received/transmitted in straight lines,
reception may not work if hiding devices are pla ...